Note: The remote will start again from the last code it tried when locking in, so if you need to start the search again, it will pick up where it last left off.
Once programmed, the Tek Partner functions just like your original remote control.The Tek Partner is pre-programmed at sun xvm virtualbox manual the factory so all you need to do is follow the instructions in this manual and you will be ready to go!Your Big Button Universal Remote Control is a state of the art device that integrates many different infrared (IR) remote controls into one.SET-UP procedure, turn on the TV manually or using your old remote.Press and release the desired device button on the remote (TV, DVD, SAT, AUX).Press the power button, if the device turns off, no further programming is required.Repeat this process for each device (for example TV, DVD, SAT, AUX).The red indicator light will turn off.Note: The indicator blink referenced in this step will occur immediately when pressing down the button.The red indicator will blink once and then remain.Press the mute button immediately after the TV shuts off to complete set-up.
(You have approximately two seconds after the device shuts off or begins playing to lock-in the code.).
If the device does not turn off, return to step 3 and use the next code found in the code list.
If it does not, return to step 2 and start the auto search again.
Register Laptop Display Shortcuts Most laptop computers require a function key or software command to activate/deactivate the laptop video output signal.Press and hold the setup button until the red indicator light stays on (approximately 4 seconds) and then release the setup button.Manually turn on the device you wish to control.Just aim the Tek Partner at your device and press the desired functions.Click the link at the below for a full list.Image Offset 15, lens Shift: Horz (min/max none, lens Shift: Vert (min/max).There may be another code in the code list that performs more functions.Home Projectors Short Throw IN120STA-Series IN124STa, compare with other products, iN124STa.Point the remote at the device.When the device shuts off or begins playing, press the #1 button to lock- in the code.