00: call service 3 was not occurred.
(thermistors open detection) 02: means that it did not reach the first stabilizing temperature (170C: 5Bh) within 50 seconds.Panasonic KX-TG1070FXB / KX-TG1070FXC / KX-TG1072FXB / KX-TGA107EXB / KX-TGA107EXC.08: means that the thermistors short (AD: 00h) and open (AD: FFh or over) were detected.06: means that it became 235C: 2Ah or over during printing.Panasonic KX-TG7105RUS / KX-TG7105RUT / KX-TG7106RUS / KX-TG7106RUT / KX-TGA710RUS / KX-TGA710RUT.Panasonic KX-TG1075RUB / KX-TG1075RUJ / KX-TG1075RUW / KX-TGA1075RUB / KX-TGA1075RUJ / KX-TGA1075RUW.Panasonic KX-TG1105RUS / KX-TG1105RUT / KX-TG1106RUS / KX-TG1106RUT / KX-TGA110RUS / KX-TGA110RUT.07: means that during printing the short of the thermistor (AD: 00h) was detected.Maximum 3 latest temperatures are displayed showing the newest on the left.05: means that it did not reach the first stabilizing temperature (170C: 5Bh) within 30 seconds from detection temperature 1 (70C: D8h).01: means that the value of AD did not increased by 6 steps or more within 10 sec soon after the heater was turned.
Panasonic KX-TG7100FXS, KX-TG7100FXT, KX-TG7102FXS, KX-TGA711FXS, KX-TGA711FXT.
Aabb ccdd eeff AA, CC and EE show the detection points and BB, DD and FF show their temperature detection points.
03: means that it did not reach the second stabilizing temperature (195C: 44h/200C: 40h) within 70 seconds after reaching the first stabilizing temperature (170C: 5Bh).
04: means that it dropped to 155C: 6Ch/160C: 66h (-40 deg) or below by the temperature control after reaching the second stabilizing temperature (195C: 44h/200C: 40h).Panasonic KX-TG8106RU / KX-TG8105RU / KX-TGA810RU.Panasonic KX-TG9541B / KX-TG9542B / KX-TGA950B.Refer to heat lamp control circuit (P.53) *Service mode *655 tells the detection number and 3 latest temperatures of the thermistor.The detection point of the Call Service 3 and the thermistor temperature is displayed.Panasonic KX-TG8301FXB / KX-TG-8302FXB / KX-TGA830FXB.KXT7630, KXT7633, KXT7636, KXT7640.