Yamaha LS9-32 Ls9 Editor Owner's Manual - Page 62 output meter page 1 2 3 A metering point Select one of the following as the point where metering will occur.
69 LS9 Editor Owner's Manual Yamaha LS9-32 Ls9 Editor Owner's Manual - Page.area you lincoln weld pak hd manual can view and edit the Recall Safe settings for all input channels and ST.
Channel link page By linking two or more input channels, you can control the parameters of these channels simultaneously.Output patch page Here you can select the output port that will directly output each input channel.69 User Defined Keys Setup window.75 user KEY.4 K Keyboard Shortcuts.76.R.G., Pro Audio Division Yamaha Corporation 007IP-B0 80 The manual viewer requires the flash plugin to be installed and enabled.L ATT (Attenuation) Adjusts the amount of attenuation/gain.This value is linked with the Reverb Time value.54 LS9 Editor Owner's Manual Yamaha LS9-32 Ls9 Editor Owner's Manual - Page.B safe ON/OFF These.
D output channel fading enable These are on/off buttons that select the output channels that will be excluded from recall operations.
ST M(C) LCR button When this button is on, the signal will be sent to the L/C/R buses which work in conjunction with each other.
Can be displayed only if you're editing ofine and have selected LS9-32 in the Model Select eld of the Mixer Setup window, or if you are editing online with the LS9-32 connected.If the selected MIX bus.is linked with the PAN encoder in the selected channel section of the LS9 panel.F threshold (Threshold level) Specifies the level at which the gate will open and close.31 LS9 Editor Owner's Manual K KEY IN source Click this to select one of the following signals to use as the key-in source.E MIX button Opens the MIX window.49 LS9 Editor Owner's Manual Yamaha LS9-32 Ls9 Editor Owner's Manual - Page.M Fader djusts the input level of the ST.PRE EQ, PRE fader, post oeak hold This is the same as in the input meter page.